Hey, it’s Tony from LearnAutoBodyAndPaint. Today’s topic is all about TITE Seal. Check out video!
I’m working on the ’67 Chevelle Project. I took out the battery tray and as you can see, it’s all rusted out. I already put an undercoating on the other side of it.
As you can see, all of this area has been undercoated before I dropped the motor in. As you can see in the video, I still have to wire brush it and do some undercoating.
Here’s Tite Seal, a product which I’ll use for this tray. I recommend that you use the paintable version of this product because it gets dry, wherein the non-paintable version of this gets tacky and wet.
I picked this product off of eBay and sells around $10-$12 per can. However, this was on promo and I got luck. I bought 4 packs for $20. I already tried it and it’s a good one.
All you need to do is shake and shoot. It’s super easy. Check out the video as I show you a demo using this product.
Directly put it rust and get a wire brush to scrub it. Wipe it down with lacquer thinner and a wet rag and give it a couple coats.
It’s Tony from LearnAutoBodyAndPaint. I hope you enjoyed this short video. If you want to get cranking on your own car projects, Grab your FREE 85-Page Auto Body And Paint Manual.
To get access to a comprehensive step-by-step guide on DIY auto body work and paint and get complete access to my projects, just like this ’67 Chevelle, which I’m uploading to the VIP member’s area once done, check out the LearnAutoBodyAndPaint VIP Program and secure your VIP slot!
Please SMASH that Like Button, Share and Subscribe to my videos!
Cheers! Talk soon!
Tony
Other Helpful Links:
Spraying Rubberized Undercoating Under Body Kit for a Clean Look
INSPIRE: Junk Parts To Car Art – LABAP Custom Car Art!
Car Painting HACKS: Basecoat Clearcoat and Undercoat Removal
its a wonderful thing to DIY your own paints to your Car. 2 Thumbs Up!
Definitely! Hey have you grabbed your free manual? https://learnautobodyandpaint.com/free-autobody-manual